Performance

The 3300V NXT2 skid steer loader is a shining example of Mustang's superior innovation and well thought-out product development.

Performance

  • Emissions certified Tier IV engines combine power and efficiency.
  • Self leveling lift action for better control of lifting loads.
  • The new chassis aids in superior weight distribution, which further enhances stability. New rear bumper provides additional protection and towing capability.
  • Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class.
  • A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights.
  • Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption.

Operator's Cab

The operator’s compartment on the 3300V NXT2 skid steer loader provides a safe and comfortable working environment for operators of all sizes.

3300V NXT2 Cabin

  • Cab forward design enhances the view to the bucket. Level II FOPS is standard equipment.
  • New side-folding restraint bar and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.
  • Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas.
  • Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner and quieter operating environment.
  • Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.

Controls

Controls on the Mustang 3300V NXT2 skid steer loader are ergonomically designed to reduce operator fatigue and increase productivity.

3300V NXT2 Cab Controls

  • T-Bar and dual-hand controls are now available.
  • Optional electronic attachment control - 14-pin connector for easy operation of all attachments.
  • Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.
  • New upper-left and upper-right instrument panels provide easy readout and switch access.
  • Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.
  • Infinitely adjustable proportional auxiliary hydraulics.
  • Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

Emissions certified Tier IV engines combine power and efficiency on the 3300V NXT2 model.

Make Yanmar
Model 4TNV98CT-NMS Stage 3B
Net Power  @ rpm 52.7 kW @ 2500
Maximum Torque 294 Nm @ 1625
Travel Speed - Max with 2-Speed Option  19.2 km/hr




  • Engine consumes less fuel, making a positive impact on the bottom line.
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine has conventional water/ethylene glycol liquid-cooled design.
  • Engine warranty, parts and service are handled through normal dealership servicing in conjunction with Mustang parts and service support.

Hydraulics

When maximum hydraulic power is needed to run demanding attachments, the 3300V skid steer loader is equipped with the tools to get the job done right.

3300V Dump

Auxiliary Hydraulics - Standard 89 L/min
High-Flow Hydraulics - Optional  132 L/min
System Relief Pressure 220.6 bar
Reservoir Capacity 40 L




  • Higher system pressure delivers more hydraulic muscle to power demanding attachments and deliver superior lifting and breakout forces.
  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Standard auxiliary detent allows the operator to set attachment for continuous operation.
  • Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material at faster transport speeds.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Pilot-controlled hydrostatic transmission with direct engine coupling provides high operating efficiency.

Lift Arm

The 3300V NXT2 skid steer loader vertical-lift arm design was created for maximum reach, superior strength and optimal operator visibility.

3300V Boom Path

Height to Hinge Pin - Fully Raised  3332 mm
Dump Reach at Full Height  813 mm




  • Additional reach is achieved at trailer loading and unloading heights.
  • Self-leveling lift action provides better control of lifting loads.
  • Low-profile lift arm design provides outstanding forward and side visibility.
  • New single-plane lift-arm design features a heavy-duty timing link, upper-rear channel support and large diameter pivot pins, providing best-in-class vertical and lateral strength and rigidity, as well as exceptional rear visibility.
  • Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.

Serviceability

We know ease of serviceability is very important to our customers. The model 3300V NXT2 skid loader is sure to exceed their expectations.

3300V Service

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Featured cab safety restraint bar for lifting ROPS/FOPS.
  • Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
  • Remote engine oil filter is on left side; easy access to hydraulic oil filter on right side.
  • Entire ROPS/FOPS assembly tilts rearward with a hydraulic lift for easy internal service access.y
  • Drive chains and axle bearings are sealed systems that require no maintenance.
  • Coded wiring takes the guesswork out of electrical system identification.

Attachments

EDGE Attachments is your trusted source for a complete range of compact loaders and excavator attachments for your compact equipment. From buckets and grapples, to hay and snow removal - EDGE Attachments has the right offering to keep your equipment running year round.
Check out our full line of attachment at Edge Attach!

Options

Operator Station

Standard Optional
Adjustable Arm Rests / Control Towers
Heating
Air Conditioning
High-Back Adjustable Seat
Cab Enclosure
  Standard Optional
Suspension Seat - Mechanical
Suspension Seat - Air Ride
Foot and Hand Throttles
Full Instrumentation
Horn
  Standard Optional
Integral Access Plate (removable)
Operator Restraint Bar
ROPS/FOPS Level II Overhead Gaurd
Sound Reduction Material
Work Lights - Front and Rear

Performance

Standard Optional
All-Tech® Attachment Mounting System
Power-A-Tach® Attachment Mounting System
Anti-Vandalism Protection
Back-up Alarm
  Standard Optional
Brake Control (Auto/Manual)
Counterweight
HydraglideTM Ride Control
HydralocTM Safety System
  Standard Optional
Hydrastatic Drive
Lift Arm Support Device
Switchable Self-Leveling Hydraulic Lift Action
Two-Speed Drive

Controls

Standard Optional
Hands-Only
Dual-Hand Controls
Hand/Foot Controls
Joystick Controls

Engine

Standard Optional
Engine Auto-Shutdown System
Engine Block Heater
Turbo-Charged Engine
Swing-out Cooler

Hydraulics

Standard Optional
Auxiliary Hydraulics
High-Flow Auxiliary Hydraulics

Specifications

Dimensions
A. Overall Operating Height - Fully Raised (mm) 172" (4369)
B. Height to Hinge Pin - Fully Raised (mm) 131.2" (3332)
C. Overall Height to top of ROPS (mm) 82" (2085)
D. Ground Clearance to Chassis (mm) 9.0" (229)
E. Overall Length with Bucket (mm) 152.5" (3874)
F. Overall Length without Bucket (mm) 119" (3023)
G. Wheelbase (mm) 49.5" (1257)
H. Dump Reach at Full Height (mm) 32" (813)
I. Rollback at Ground Level 29°
J. Dump Angle 42°
K. Overall Width (mm) 72" (1829)
L. Bucket Width (mm) 74" (1880)
M. Clearance Circle - Rear (mm) 69.5" (1765)
N. Clearance Circle - Front w/o Bucket (mm) 56" (1422)
O. Clearance Circle - Front w/Bucket (mm) 94.5" (2400)
P. Seat to Ground Height (mm) 41" (1041)
Q. Rollback at Full Height 94°
R. Dump Height (mm) 98.5" (2502)
S. Departure Angle 25°
Standard Tire Size 14.00-17.5 HD
Engine
Make Yanmar
Model 4TNV98CT-NMS Tier IV
Net Power (kW) 70.7 hp (52.7)
Gross Power (kW) 72 hp (53.7)
RPM for Optimal Power 2500 rpm
Displacement (L) 203 cu.in. (3.3)
Hydraulics
Auxiliary Hydraulics - Standard (L/min) 23.5 gpm (89)
High-Flow Hydraulics - Optional (L/min) 35 gpm (132)
Filtration 3,200 psi (220.6)
Reservoir Capacity (L) 10.5 gal. (40)
Capacities/Weight
Rated Operating Capacity (kg) 3,300 lbs. (1497)
Fuel Tank (L) 24.5 gal. (72.7)
Travel Speed - Maximum (km/hr) 8.1 mph (13)
Operating Weight - Approximate (kg) 9090 lbs. (4123)
2700V-3300V_SpecDiagram