Performance

The 2700V NXT2 Skid Steer Loader is a product of superior innovation and well thought-out product development.

2700V NXT2 Gravel

  • Emissions certified Tier IV engines combine power and efficiency.
  • Self leveling lift action for better control of lifting loads.
  • The chassis aids in superior weight distribution, which further enhances stability.
  • Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class.
  • A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights.
  • Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption.

Operator's Cab

The spacious operator’s compartment on the 2700V NXT2 Skid Steer Loader is every operator’s dream.

Domed Cab Door

  • Level II FOPS is standard equipment.
  • Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide cleaner and quieter operating environment.
  • Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas.
  • Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.
  • Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.

Controls

The 2700V NXT2 Skid Steer Loader is ergonomically designed to reduce operator fatigue and increase productivity.

2700V Cabin

  • T-Bar and dual-hand controls now available.
  • Optional electronic attachment control - 14-pin connector for easy operation of all attachments.
  • Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.
  • New upper-left and upper-right instrument panels provide easy readout and switch access.
  • Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.
  • nfinitely adjustable proportional auxiliary hydraulics.
  • Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

Emissions certified Tier IV engines combine power and efficiency on the 2700V NXT2 model.

2700V_Engine

Make Yanmar
Model 4TNV98CT-NMS Stage 3B
Net Power  @ rpm 52.7 kW @ 2500
Maximum Torque 294 Nm @ 1625
Travel Speed - Max with 2-Speed Option  19.2 km/hr




  • Engine consumes less fuel, making a positive impact on the bottom line.
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine has conventional water/ethylene glycol liquid-cooled design.
  • Engine warranty, parts and service are handled through normal dealership servicing in conjunction with Mustang parts and service support.

Hydraulics

When maximum hydraulic power is needed to run demanding attachments, the 2700V NXT2 Skid Steer Loader is equipped with the tools to get the job done right.

2700V NXT2 Dump Dirt

Auxiliary Hydraulics - Standard 289 L/min
High-Flow Hydraulics - Optional  132 L/min
System Relief Pressure 220.6 bar 
Reservoir Capacity 40 L




  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Standard auxiliary detent allows the operator to set attachment for continuous operation.
  • Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material at faster transport speeds.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Pilot-controlled hydrostatic transmission with direct engine coupling provides high operating efficiency.

Lift Arm

The 2700V NXT2 Skid Steer Loader does not use the ordinary vertical-lift design. This loader’s lift arm is designed with the operator in mind.

2700V NXT2 Vertical Lift

Height to Hinge Pin - Fully Raised  3310 mm
Dump Reach at Full Height 813 mm




  • Low-profile lift arm design provides outstanding forward and side visibility.
  • Self-leveling lift action provides better control of lifting loads.
  • Heavy-duty timing link design, upper-rear channel support and large diameter pivot pins provide extra strength and rigidity to the lift arm, and exceptional rear visibility.
  • Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.

Serviceability

As with any Mustang loader, serviceability on the 2700V NXT2 Skid Loader is a snap.

2700V NXT2 Serviceability

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Featured cab safety restraint bar for lifting ROPS/FOPS.
  • Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
  • Remote engine oil filter is on left side; easy access to hydraulic oil filter on right side.
  • Entire ROPS/FOPS assembly tilts rearward with a hydraulic lift for easy internal service access.
  • Drive chains and axle bearings are sealed systems that require no maintenance.
  • Coded wiring takes the guesswork out of electrical system identification.

Attachments

EDGE Attachments is your trusted source for a complete range of compact loaders and excavator attachments for your compact equipment. From buckets and grapples, to hay and snow removal - EDGE Attachments has the right offering to keep your equipment running year round.
Check out our full line of attachment at Edge Attach!

Options

Operator Station

Standard Optional
Adjustable Arm Rests / Control Towers
Heating
Air Conditioning
High-Back Adjustable Seat
Cab Enclosure
  Standard Optional
Suspension Seat - Mechanical
Suspension Seat - Air Ride
Foot and Hand Throttles
Full Instrumentation
Horn
  Standard Optional
Integral Access Plate (removable)
Operator Restraint Bar
ROPS/FOPS Level II Overhead Gaurd
Sound Reduction Material
Work Lights - Front and Rear

Performance

Standard Optional
All-Tech® Attachment Mounting System
Power-A-Tach® Attachment Mounting System
Anti-Vandalism Protection
Back-up Alarm
  Standard Optional
Brake Control (Auto/Manual)
Counterweight
HydraglideTM Ride Control
HydralocTM Safety System
  Standard Optional
Hydrastatic Drive
Lift Arm Support Device
Switchable Self-Leveling Hydraulic Lift Action
Two-Speed Drive

Controls

Standard Optional
Hands-Only
Dual-Hand Controls
Hand/Foot Controls
Joystick Controls

Engine

Standard Optional
Engine Auto-Shutdown System
Engine Block Heater
Turbo-Charged Engine
Swing-out Cooler

Hydraulics

Standard Optional
Auxiliary Hydraulics
High-Flow Auxiliary Hydraulics

Specifications

Dimensions
A. Overall Operating Height - Fully Raised (mm) 167.4" (4252)
B. Height to Hinge Pin - Fully Raised (mm) 130.3" (3310)
C. Overall Height to top of ROPS (mm) 81" (2057)
D. Ground Clearance to Chassis (mm) 8" (203)
E. Overall Length with Bucket (mm) 148" (3759)
F. Overall Length without Bucket (mm) 116.5" (2959)
G. Wheelbase (mm) 49.5" (1257)
H. Dump Reach at Full Height (mm) 32" (813)
I. Rollback at Ground Level 29°
J. Dump Angle 42°
K. Overall Width (mm) 69.5" (1661)
L. Bucket Width (mm) 70" (1778)
M. Clearance Circle - Rear (mm) 66.5" (1689)
N. Clearance Circle - Front w/o Bucket (mm) 56" (1422)
O. Clearance Circle - Front w/Bucket (mm) 90" (2286)
P. Seat to Ground Height (mm) 40" (1016)
Q. Rollback at Full Height 94°
R. Dump Height (mm) 100" (2540)
S. Departure Angle 27°
Standard Tire Size 12.00 x 16.5 HD
Engine
Make Yanmar
Model 4TNV98CT - Tier IV
Net Power (kW) 70.7 hp (52.7)
Gross Power (kW) 72 hp (53.7)
RPM for Optimal Power 2500 rpm
Displacement (L) 202.6 cu.in. (3.3)
Maximum Torque (Nm) @ rpm 217 ft.-lbs. (294) @ 1625
Hydraulics
Auxiliary Hydraulics - Standard (L/min) 23.5 gpm (89)
High-Flow Hydraulics - Optional (L/min)  35 gpm (132)
High Flow System Pressure (bar) 3,200 psi (220.6)
Reservoir Capacity (L) 10.5 gal. (40)
Capacities/Weight
Rated Operating Capacity (kg) 2700 lbs. (1225)
Tipping Load (kg) 5400 lbs. (2449)
Fuel Tank (L) 24.5 gal. (72.7)
Travel Speed - Maximum (km/hr) 7.4 mph (12)
Operating Weight - Approximate (kg) 8,150 lbs. (3697)
2700V-3300V_SpecDiagram