Attachments

EDGE Attachments is your trusted source for a complete range of compact loaders and excavator attachments for your compact equipment. From buckets and grapples, to hay and snow removal - EDGE Attachments has the right offering to keep your equipment running year round.
Check out our full line of attachment at Edge Attach!

Options

Operator Station

Standard Optional
Adjustable Arm Rests / Control Towers
Heating
Air Conditioning
High-Back Adjustable Seat
Cab Enclosure
  Standard Optional
Suspension Seat - Mechanical
Suspension Seat - Air Ride
Foot and Hand Throttles
Full Instrumentation
Horn
  Standard Optional
Integral Access Plate (removable)
Operator Restraint Bar
ROPS/FOPS Level II Overhead Gaurd
Sound Reduction Material
Work Lights - Front and Rear

Performance

Standard Optional
All-Tech® Attachment Mounting System
Power-A-Tach® Attachment Mounting System
Anti-Vandalism Protection
Back-up Alarm
  Standard Optional
Brake Control (Auto/Manual)
Counterweight
HydraglideTM Ride Control
HydralocTM Safety System
  Standard Optional
Hydrastatic Drive
Lift Arm Support Device
Switchable Self-Leveling Hydraulic Lift Action
Two-Speed Drive

Controls

Standard Optional
Hands-Only
Dual-Hand Controls
Hand/Foot Controls
Joystick Controls

Engine

Standard Optional
Engine Auto-Shutdown System
Engine Block Heater
Turbo-Charged Engine
Swing-out Cooler

Hydraulics

Standard Optional
Auxiliary Hydraulics
High-Flow Auxiliary Hydraulics

Specifications

Dimensions
A. Overall Operating Height - Fully Raised (mm) 139.6" (3546)
B. Height to Hinge Pin - Fully Raised (mm) 108.1" (2746)
C. Overall Height to top of ROPS (mm) 70.3 (1786)
D. Ground Clearance to Chassis (mm)  6.0" (152)
E. Overall Length with 55" Bucket (mm) 114" (2896)
F. Overall Length without Bucket (mm) 84.5" (2146)
G. Wheelbase (mm) 34.5" (876)
H. Dump Reach at Full Height (mm) 22.8" (579)
I. Rollback at Ground Level 29°
J. Dump Angle 42°
K. Overall Width - Less Bucket (mm) 48.4" (1229)
L. Bucket Width (mm) 55" (1404)
M. Clearance Circle - Rear (mm) 54.1" (1374)
N. Clearance Circle - Front w/o Bucket (mm) 44.1" (1120)
O. Clearance Circle - Front w/Bucket (mm) 69.4" (1763)
P. Seat to Ground Height (mm) 32.6" (828)
Q. Rollback at Full Height 99°
R. Dump Height (mm) 84.5" (2146)
S. Departure Angle 26°
Standard Tire Size 27x8.5x15 HD
Engine
Make Yanmar
Model 3TNV88 Intermin Tier IV
Gross Power (kW) @ 2800 rpm N/A
Net Power (kW) @ 2400 rpm     35 hp (26)
Maximum Torque (Nm) @ 1680 rpm 80 ft.-lbs. (108)
Displacement (L) 100 cu.in. (1.6)
Hydraulics
Auxiliary Hydraulics - Standard (L/min) 14.5 gpm (55)
High-Flow Hydraulics - Optional (L/min) N/A
Reservoir Capacity (L) 8 gal. (30.3)
Electrical
Battery (CCA) 12-volt (675)
Starter (kW) 12-volt (2.3)
Alternator 40-amp
Capacities/Weight
Rated Operating Capacity (kg) 1050 lbs. (476)
With optional counterweight (kg) 1175 lbs. (533)
Fuel Tank (L) 10.4 gal. (39.4)
Travel Speed - Maximum (km/hr) 5.9 mph (9.5)
Operating Weight - Approximate (kg) 4000 lbs. (1814)
R-Series_SpecDiagram