Mustang 2012 Dump

Net Power 17.9 kW
Maximum Torque 86 Nm
Rated Operating Capacity 386 kg

Operator's Cab



  • Restraint bar design is tied into the HydralocTM safety system, assuring operator safety by preventing engine start-up when the operator is not in the seat with the restraint bar in>
  • with the sturdy Level II-certified ROPS/ FOPS structure. Operators also enjoy an unobstructed, panoramic view to the attachment and surrounding work areas.


Cab Controls

  • With ultraresponsive T-bar hands-only



Make: Yanmar Model: 3TNV82 Stage 3A
Net Power @ rpm 17.9 kW @ 2400
Maximum Torque @ rpm 86 Nm @ 1200
Displacement 1.3 L

  • Yanmar Tier IV 3-cylinder naturally aspirated engine provides the power you need.
  • After treatment meets all Tier IV requirements through proven technology.


2012 Hydraulics

Auxiliary Hydraulics - Standard 38.2 L/min
High-Flow Auxiliary Hydraulics - Option N/A
Reservoir Capacity 27.3 L

  • Hydraulic self-leveling is available as an option.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.


Mustang 2012 Feed

  • A high-strength, low-profile design maximizes operator visibility for added performance and safety.


2012 Tight Space

  • Level II FOPS with a robust operator stations design provides added protection for the operator.


EDGE Attachments is your trusted source for a complete range of compact loaders and excavator attachments for your compact equipment. From buckets and grapples, to hay and snow removal - EDGE Attachments has the right offering to keep your equipment running year round.
Check out our full line of attachment at Edge Attach!


Operator Station

Standard Optional
Adjustable Arm Rests / Control Towers
Air Conditioning
High-Back Adjustable Seat
Cab Enclosure
  Standard Optional
Suspension Seat - Mechanical
Suspension Seat - Air Ride
Foot and Hand Throttles
Full Instrumentation
  Standard Optional
Integral Access Plate (removable)
Operator Restraint Bar
ROPS/FOPS Level II Overhead Gaurd
Sound Reduction Material
Work Lights - Front and Rear


Standard Optional
All-Tech® Attachment Mounting System
Power-A-Tach® Attachment Mounting System
Anti-Vandalism Protection
Back-up Alarm
  Standard Optional
Brake Control (Auto/Manual)
HydraglideTM Ride Control
HydralocTM Safety System
  Standard Optional
Hydrastatic Drive
Lift Arm Support Device
Switchable Self-Leveling Hydraulic Lift Action
Two-Speed Drive


Standard Optional
Dual-Hand Controls
Hand/Foot Controls
Joystick Controls


Standard Optional
Engine Auto-Shutdown System
Engine Block Heater
Turbo-Charged Engine
Swing-out Cooler


Standard Optional
Auxiliary Hydraulics
High-Flow Auxiliary Hydraulics


A. Overall Operating Height - Fully Raised 3167 mm
B. Height to Hinge Pin - Fully Raised 2438 mm
C. Overall Height to top of ROPS 1897 mm
D. Ground Clearance to Chassis 150 mm
E. Overall Length with 914 mm Bucket 2576 mm
F. Overall Length without Bucket 1836 mm
G. Wheelbase 775 mm
H. Dump Reach at Full Height 376 mm
I. Rollback at Ground Level 22°
J. Dump Angle 46°
K. Overall Width - Less Bucket 909 mm
L. Bucket Width 914 mm
M. Clearance Circle - Rear 1097 mm
N. Clearance Circle - Front w/o Bucket 833 mm
O. Clearance Circle - Front w/Bucket 1473 mm
P. Seat to Ground Height 879 mm
Q. Rollback at Full Height 100°
R. Dump Height 1836 mm
S. Departure Angle 30°
Standard Tire Size 5.70 x 12
Make Yanmar
Model 3TNV82 Stage 3A
Gross Power @ 2800 rpm 18.1 kW
Net Power @ 2400 rpm     17.8 kW
Maximum Torque @ 1200 rpm 86 Nm
Displacement 1.3 L
Auxiliary Hydraulics - Standard 38.2 l/min
High-Flow Hydraulics - Optional N/A
Reservoir Capacity 27.3 L
Battery (CCA) 950 CCA
Starter (kW) 1.7 kW
Alternator 40-amp
Rated Operating Capacity 386 kg
With optional counterweight N/A
Fuel Tank 29 L
Travel Speed - Maximum 8.9 km/hr
Operating Weight - Approximate 1352 kg