Net Power 33.2 kW
Maximum Torque 146.2 Nm
Rated Operating Capacity  612 kg

Operator's Cab

The 1350R NXT2 features a new, state-of-the-art, fully-adjustable operator's cab.



  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Hydraloc System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.


Joystick Controls

  • NEW LOW EFFORT control choices now include standard Servo-Assist T-Bar or Servo-Assist Hand/Foot or optional Pilot Joystick controls with Hydraglide™ ride control system to drastically reduce lever efforts and lower operator fatique.
  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
  • Hydralocsystem applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.


The 1350R NXT2 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.


Make: Yanmar Model: 4TNV88C-KMS Stage 3B
Net Power @ rpm 33.2 kW @ 2800
Maximum Torque @ rpm 146.2 Nm @ 1820
Displacement 2.19 L

  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology.


The 1350R NXT2 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.


Auxiliary Hydraulics - Standard 70 L/min
High-Flow Auxiliary Hydraulics - Option  N/A
Reservoir Capacity 34.8 L

  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.


The 1350R NXT2 features a low-profile lift arm.

1350R Radial Lift Path

  • 42% more visibility with new low-profile lift arm.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.


Excellent service access and quality components pair up to provide durable machines that are easy to maintain.


  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS


EDGE Attachments is your trusted source for a complete range of compact loaders and excavator attachments for your compact equipment. From buckets and grapples, to hay and snow removal - EDGE Attachments has the right offering to keep your equipment running year round.
Check out our full line of attachment at Edge Attach!


Operator Station

Standard Optional
Adjustable Arm Rests / Control Towers
Air Conditioning
High-Back Adjustable Seat
Cab Enclosure
  Standard Optional
Suspension Seat - Mechanical
Suspension Seat - Air Ride
Foot and Hand Throttles
Full Instrumentation
  Standard Optional
Integral Access Plate (removable)
Operator Restraint Bar
ROPS/FOPS Level II Overhead Gaurd
Sound Reduction Material
Work Lights - Front and Rear


Standard Optional
All-Tech® Attachment Mounting System
Power-A-Tach® Attachment Mounting System
Anti-Vandalism Protection
Back-up Alarm
  Standard Optional
Brake Control (Auto/Manual)
HydraglideTM Ride Control
HydralocTM Safety System
  Standard Optional
Hydrastatic Drive
Lift Arm Support Device
Switchable Self-Leveling Hydraulic Lift Action
Two-Speed Drive


Standard Optional
Dual-Hand Controls
Hand/Foot Controls
Joystick Controls


Standard Optional
Engine Auto-Shutdown System
Engine Block Heater
Turbo-Charged Engine
Swing-out Cooler


Standard Optional
Auxiliary Hydraulics
High-Flow Auxiliary Hydraulics


A. Overall Operating Height - Fully Raised 3655 mm
B. Height to Hinge Pin - Fully Raised 2784 mm
C. Overall Height to top of ROPS 1908 mm
D. Ground Clearance to Chassis 201 mm
E. Overall Length with 1372 mm Bucket 3056 mm
F. Overall Length without Bucket 2342 mm
G. Wheelbase 955 mm
H. Dump Reach at Full Height 577 mm
I. Rollback at Ground Level 29°
J. Dump Angle 40°
K. Overall Width - Less Bucket 1336 mm
L. Bucket Width 1372 mm
M. Clearance Circle - Rear 1372 mm
N. Clearance Circle - Front w/o Bucket 1130 mm
O. Clearance Circle - Front w/Bucket 1842 mm
P. Seat to Ground Height 846 mm
Q. Rollback at Full Height 82°
R. Dump Height 2098 mm
S. Departure Angle 25°
Standard Tire Size 10.00 x 16.5 HD
Make Yanmar
Model 4TNV88C-BKMSR2 Stage 3A
Gross Power @ 2800 rpm 34.5 kW
Net Power @ 2800 rpm     33 kW
Maximum Torque @ 1820 rpm 146 Nm
Displacement 2.19 L
Auxiliary Hydraulics - Standard 64.4 L/min
High-Flow Hydraulics - Optional N/A
Reservoir Capacity 37.9 L
Battery 950 CCA
Starter 3.0 kW
Alternator 100-amp
Rated Operating Capacity 612 kg
With optional counterweight 680 kg
Fuel Tank 62.5 L
Travel Speed - Maximum 12.9 km/hr
Operating Weight - Approximate 2304 kg