Performance

1050R

Net Power 24.7 kW
Maximum Torque 108 Nm
Rated Operating Capacity  476 kg





Operator's Cab

The 1050R features a new, state-of-the-art, fully-adjustable operator's cab.

1050R

 

  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Hydraloc System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.

Controls

Joystick Controls

  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • Two control options include T-Bar or Hand/Foot.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
  • Hydralocsystem applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

The 1050R is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.

Engine

Make: Yanmar Model: 3TNV88C-KMSStage 3A
Net Power @ rpm 24.7 kW @ 2800
Maximum Torque @ rpm 108 Nm @ 1680
Displacement 1.6 L






  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology.

Hydraulics

The 1050R has amped-up hydraulic systems which incorporate intuitive design for precise controllability.

1050R Cows

Auxiliary Hydraulics - Standard 55 L/min
High-Flow Auxiliary Hydraulics - Option  N/A
Reservoir Capacity 30.3 L






  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.

Liftarm

The 1050R features an all-new low-profile lift arm.

1050R Dirt

  • 42% more visibility with new low-profile lift arm.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.

Serviceability

Excellent service access and quality components pair up to provide durable machines that are easy to maintain.

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS

Attachments

EDGE Attachments is your trusted source for a complete range of compact loaders and excavator attachments for your compact equipment. From buckets and grapples, to hay and snow removal - EDGE Attachments has the right offering to keep your equipment running year round.
Check out our full line of attachment at Edge Attach!

Options

Operator Station

Standard Optional
Adjustable Arm Rests / Control Towers
Heating
Air Conditioning
High-Back Adjustable Seat
Cab Enclosure
  Standard Optional
Suspension Seat - Mechanical
Suspension Seat - Air Ride
Foot and Hand Throttles
Full Instrumentation
Horn
  Standard Optional
Integral Access Plate (removable)
Operator Restraint Bar
ROPS/FOPS Level II Overhead Guard
Sound Reduction Material
Work Lights - Front and Rear

Performance

Standard Optional
All-Tech® Attachment Mounting System
Power-A-Tach® Attachment Mounting System
Anti-Vandalism Protection
Back-up Alarm
  Standard Optional
Brake Control (Auto/Manual)
Counterweight
HydraglideTM Ride Control
HydralocTM Safety System
  Standard Optional
Hydrastatic Drive
Lift Arm Support Device
Switchable Self-Leveling Hydraulic Lift Action
Two-Speed Drive

Controls

Standard Optional
Hands-Only
Dual-Hand Controls
Hand/Foot Controls
Joystick Controls

Engine

Standard Optional
Engine Auto-Shutdown System
Engine Block Heater
Turbo-Charged Engine
Swing-out Cooler

Hydraulics

Standard Optional
Auxiliary Hydraulics
High-Flow Auxiliary Hydraulics

Specifications

Dimensions
A. Overall Operating Height - Fully Raised 3546 mm
B. Height to Hinge Pin - Fully Raised 2746 mm
C. Overall Height to top of ROPS 1786 mm
D. Ground Clearance to Chassis 152 mm
E. Overall Length with 1404 mm Bucket 2896 mm
F. Overall Length Less Bucket 2258 mm
G. Wheelbase 876 mm
H. Dump Reach at Full Height 579 mm
I. Rollback at Ground Level 29°
J. Dump Angle 42°
K. Overall Width - Less Bucket 1229 mm
L. Bucket Width 1404 mm
M. Clearance Circle - Rear 1374 mm
N. Clearance Circle - Front w/o Bucket 1120 mm
O. Clearance Circle - Front w/Bucket 1763 mm
P. Seat to Ground Height 828 mm
Q. Rollback at Full Height 99°
R. Dump Height 2146 mm
S. Departure Angle 26°
Standard Tire Size 27x8.5x15 HD
Engine
Make Yanmar
Model 3TNV88C-KMS Stage 3A
Gross Power @ 2800 rpm 25.5 kW
Net Power @ 2800 rpm     24.7 kW
Maximum Torque @ 1820 rpm 108 Nm
Displacement 1.6 L
Hydraulics
Auxiliary Hydraulics - Standard 55 L/min
High-Flow Hydraulics - Optional N/A
Reservoir Capacity 30.3 L
Electrical
Battery 950 CCA
Starter 3.0 kW
Alternator 40-amp
Capacities/Weight
Rated Operating Capacity 476 kg
With optional counterweight 533 kg
Fuel Tank 39.4 L
Travel Speed - Maximum 9.5 km/hr
Operating Weight - Approximate 1814 kg
R-Series_SpecDiagram